HYDRO-800 EP-11
Piston Type

HYDRAULIC DRIVEN A.C. GENERATOR

Hydraulically driven piston type AC generator 8KW


Fabco is a global supplier of mobile power. Our generators have been used by the U.S. Military in both war and peace time for the past 50 years. It is our experience in building generators that meet military specifications that sets Fabco apart from all others. Our commercial units are built with those same standards.


The Hydro-800 EP-11 is made from high-grade aluminum to ensure longevity under the most stressful conditions. This unit was designed to withstand the rigors of heavy use and inclement weather.

MODEL -
HYDRO-800EP-11
VOLTS -
120 or 120/240
AMPS -
66/33
WATTS -
8000 CONTINUOUS
RPM -
3600
HZ -
60
INSULATION CLASS -
F&H
PHASE -
SINGLE
POWER FACTOR -
1.0
RATED AMP TEMP. -
40°C
GPM -
11
PSI -
2500
WEIGHT -
140 LBS.
MOTOR -
PISTON TYPE WITH CASE DRAIN
DIMENSIONS -
26" L x 9" W x 13" H
Will Operate on any 2000 to 2500 PSI Open Circuit or Closed Circuit Loop System
Note: All ratings taken at 100º oil temperature (Do not exceed 170º)

The Hydro-800EP-11 has the exclusive patented "Fury Precision Power Coupler Housing". This ensures perfect alignment and provides chatter and vibration free operation thus guaranteeing extremely long coupling life.

Optional Control Panel
Optional Control Panel

Control Panel

Volt Meter
120V. Duplex Receptacle
Waterproof Cover
Automatic Overload Protection Device

Optional Pressure Compensating Flow Control

Pressure Compensating Flow Control

To maintain a constant
generator RPM
and voltage output