HYDRO 300C/HYDRO 300CX

HYDRAULIC DRIVEN A.C. GENERATOR

3KW Hydraulic Driven AC Generator


Fabco is a global supplier of mobile power. Our generators have been used by the U.S. Military in both war and peace time for the past 50 years. It is our experience in building generators that meet military specifications that sets Fabco apart from all others. Our commercial units are built with those same standards.


The Hydro 300C-6/300CX-6 is made from high-grade aluminum to ensure longevity under the most stressful conditions. This unit was designed to withstand the rigors of heavy use and inclement weather.

MODEL -
HYDRO-300C-6
VOLTS -
120 or 120/240
AMPS -
26/13
WATTS -
3000 CONTINUOUS (3500 PEAK)
RPM -
3600
HZ -
60
INSULATION CLASS -
F&H
PHASE -
SINGLE
POWER FACTOR -
1.0
RATED AMP TEMP. -
40°C
GPM -
6
PSI -
1500
WEIGHT -
40 LBS.
MOTOR -
GEAR TYPE
DIMENSIONS -
16" L x 8" W x 7" H
Will Operate on any 2000 to 2500 PSI Open Circuit or Closed Circuit Loop System
Note: All ratings taken at 100º oil temperature (Do not exceed 170º)
MODEL -
HYDRO-300CX
VOLTS -
120 or 120/240
AMPS -
26/13
WATTS -
3000 CONTINUOUS (3500 PEAK)
RPM -
3600
HZ -
60
INSULATION CLASS -
F&H
PHASE -
SINGLE
POWER FACTOR -
1.0
RATED AMP TEMP. -
40°C
GPM -
6
PSI -
1500
WEIGHT -
42 LBS.
MOTOR -
GEAR TYPE
DIMENSIONS -
16" L x 8" W x 7" H
Will Operate on any 2000 to 2500 PSI Open Circuit or Closed Circuit Loop System
Note: All ratings taken at 100º oil temperature (Do not exceed 170º)
Optional Control Panel

Control Panel

Volt Meter
120V. Duplex Receptacle
Waterproof Cover
Automatic Overload Protection Device

Next