AC generator that delivers
electricity from engine idle
to red line speeds up to 8,000 RPM
MADE SPECIFICALLY FOR
- Scissor Lifts & Booms
- Crack Filling Equipment
- Fire & Rescue Vehicles
The Powder Mite® does not alter or affect your vehicle engine’s own electrical system. It will not discharge your vehicle’s battery so long as the engine’s DC generator is functioning properly. The Power Mite® is designed to operate at between 1200 to 1500 engine RPM’s-speeds that keep the engine cool and attain maximum efficiency and economy of operation. An optional voltage regulator provides constant voltage at varying speed.
Power Mite® kit includes universal mounting
brackets for quick installation adaptability to
any vehicle, including scissor lifts & booms,
crack filling equipment, fire fighting & rescue
vehicles, ambulances and more…converts any
vehicles engine into an AC generating system!
Fabco generators are environmentally clean and non-polluting. Fabco generators do not require a second engine and Save You Money.
Rotors dynamically balanced for high operation.
Can spin at speeds up to 8,000 RPM Longer bearing life.
Oversize “303” sealed, heavy-duty bearings used at both ends
Longer bearing life.
4 heavy –duty brush holders and brushes (other Manufacturers use only two)
Less wear, longer brush life.
Largest size slip ring of all vehicle mounted AC alternators.
Less heat generated longer life
Automatic overload protection device
Prevents damage to generator
Plated Hardware
Prevents Rust
Most Compact & lightest
Made to fit into the smaller engine Compartments of newer vehicles
Field Coils double taped with fiberglass & Cotton
Prevents short in hostile environments.
Make Power Mite™ the most durable
belt driver generator on the market
Fabco Power is ISO-9000 compliant
All Fabco generators conform to:
CEI 2-3, EN 60034-1, IEC 34-1, VDE 0530, BS 4999-5000, NF C 51-111,
CAN/CSA-C22.2n° 1000-95,
European Community Standards;
73/23, 89/392, 89/336
EU Materials Management Legislation:
RoHS 2 and Reach.
Family owned and Operated for over 50 years
High magnetic steel tubing
Alamag Alloy castings
High magenetic steel forgings
Copper alloy
Four, self adjusting
Baked with waterproof varnish
Nickel alloy with patented winding of
high-temperature-resistant coated wire;
impregnated and baked with waterproof epoxy.
Each Fabco Power generator is warrantied to the original owner to be free from defects in material or workmanship under normal use and service for One (1) year from the date of purchase.
Our obligation under this warranty is limited to replacing or repairing, at our option, any part or parts proved to be so defective which are returned freight prepaid.
MODEL | Volts | Amps Peak |
Watts Peak |
Watts Continuous |
RPM | Weight |
---|---|---|---|---|---|---|
PM-110 ±2 hz. | 120 | 29 | 3500 | 2500 | 3600 | 27 lbs. |
*Blue Max | 120 | 37 | 4500 | 3000 | 3600 | 32 lbs. |
*Blue Max 50 hz. | 120 | 30 | 3600 | 2400 | 3000 | 32 lbs. |
*PM-220 | 220 | 15 | 3500 | 2500 | 3600 | 27 lbs. |
*PM-220 50 hz. | 220 | 13 | 3000 | 2000 | 3000 | 27 lbs. |
• These models must be ordered with a voltage regulator
SOLD – INSTALLED – SERVICES BY:
Patent #6528973
The Optional Power Mite® Voltage Regulator provides constant voltage at varying engine speeds. The innovate design of the Power Mite® Voltage regulator is unique. There are no relays, transformers or moving parts to wear which make this unit extremely reliable under the most severe conditions.